| Product Number | IMDBOX |
|---|---|
| Standards | IEC 61439-1, -3 |
| Enclosure | Impact resistant polyester |
| IP class | IP65 (IP20C with open hatch) |
| Rated impulse voltage | 250V |
| Earthing system | IT-system |
| Rated voltage UE | 1 x 230 VAC |
| Nominal current, IE | max. 16 A |
| Protection against indirect contact | - Connection box: Total isolation - Outgoing circuit: Automatic disconnection |
| Operating temperature | -25°C to +60°C |
| Storage temperature | -25°C to +60°C |
| Weight | 1.32 kg |
| Dimensions | 115x200x150 mm (HxLxW) |
| Certifications | CE Conformity DGUV 203-032 Conformity |
IMDBOX - DGUV Compliant Safety System
Product number:
4901
4901
IMDBOX – DGUV Compliant Safety System
Full level of safety – No ground spike needed.
The AWILCO IMD boks offers the highest level of safety as well as “ease of use” for the user – no additional impractical and costly ground spike is needed. Simply connect your equipment to the outlet and you are ready to work, having the same electrical protection as in a properly grounded building, thus complying with DS/HD 60364 and german DGUV.
Connect the IMD boks When using 230V AC from energy power systems, inverters or generators in professional work environments.
To protect the user, the IMDBOX is equipped with both a combi C16A/30mA RCBO protection relay and an Isolation Monitoring Device combined with a 16A contactor.
And you can even use it in your existing installation/vehicle if you wish you upgrade on safety today. It is “plug-and-play” – It is as easy as it get’s.
The IMD-boks offers safety for the user as well as the vehicle owner.
More info:
More about the product
The IMDBOX ensures electrical safety when using an AC 230V energy power system.
That could be mobile inverters- or generators run by fossil fuel inside a vehicle using ’protective separation with insulation monitoring and disconnection’.
To provide the highest safety, the IMDBOX is equipped with both a combi C16A/30mA RCBO protection relay and an Isolation Monitoring Device combined with a 16A contactor.
No ground spear – but same safety
Usually installations inside buildings are connected to the grid with a ground spear or directly to the power plant. However using a ground spear from a moving vehicle is not possible and connecting one from a parked vehicle requires a professional electrician to measure the present resistance in the ground.
The combination of both the protective separation and the integrated protective devices mentioned above, offer a safe environment for end users of AC 230V, both inside and outside vehicles equipped with AC 230V systems connected to the IMDBOX.
The highest possible safety
The integrated IMD in the IMDBOX continuously monitors the insulation resistance of the unearthed system and the currently measured insulation resistance is indicated on the built-in LED of the IMD. In this way changes such as the connection of loads via socket(s) can easily be visually detected through the hatch.
Using the IMDBOX in vehicles mounted after inverters and other 230V power products will offer you the highest possible safety just as in a building.
